Ana su boru hattı

Giriş

Yerdeki fazla su, tarım ve spor sektörlerinde üretimin azalması ve toprak erozyonu gibi birçok soruna yol açabilir. Bu nedenle, etkili bir drenaj sistemi herhangi bir yüzey suyu yönetim planının hayati bir bileşenidir.

Rothenplast’ın Drenaj Boruları spor çimlerinde, binaların temellerinde, otoyollarda ve tarım arazilerinde kullanılır. Rothenplast bu boruları farklı boyutlarda ve filtreli veya filtresiz olarak üretir.

Drenaj boruları UPVC ve Polietilen olmak üzere iki tipte üretilir. Rothen Plast üretim grubu, İran’daki bu boruların en büyük üreticisidir.

Drenaj boruları Alman DIN1187 standardına ve İran ulusal standart numarası INSO7669’a göre üretilir ve tedarik edilir.

Bu şirketin kalite kontrol birimi ve laboratuvarı, ürünlerin ve hammaddelerin üretim sürecini kontrol eder ve inceler.

Filtreli drenaj borularının başlıca uygulamaları şunlardır:
1. Sızan tuzlu topraklardan suyu uzaklaştırmak ve toprakları ekilebilir tarlalara dönüştürmek
2. Çiftliklerde yağış ve sulama nedeniyle oluşan fazla suyu uzaklaştırarak toprağın kalitesini korur

Drenaj borusu üreticisi

Drenaj borusu, belirli bir yüzeyden, geçitten ve zeminden fazla suyu çıkarmak için kullanılır. Yeraltı suyunun veya yüzey akışının su pompalayarak veya yerçekimi yöntemi kullanılarak boşaltılmasına drenaj denir. Drenaj işlemi iki belirli tipte yapılır. Biri inşaat mühendisliği ve inşaat sektöründe yapılardan fazla suyu çıkarmak için kullanılır. Ayrıca topraktaki mineralleri kontrol etmek için tarım alanlarındaki su seviyesini kontrol etmek için kullanılır. Rothen Plast, UPVC, Oluklu ve filtreli drenaj borusu gibi farklı tiplerde drenaj boruları üretir.

PVC drenaj borusu

Drenaj borusunun üretimi çok hassastır. Öncelikle drenaj borusu ekstruder yöntemi ile PVC malzemeden üretilmelidir. Daha sonra siparişe göre boruya delikler eklenir. Ve gerekirse boruya filtre eklenir.

Polietilen drenaj borusu

Uzun ve kullanışlı ömrü nedeniyle en ekonomik boru türüdür ve borunun kalitesine, sınıfına ve boyutuna bağlı olarak farklı fiyatları vardır. Bir drenaj borusunun fiyatı, drenaj için kullanılan borunun türüyle ilgilidir.

Herhangi bir drenaj sisteminin yürütülmesi, hidrolik ve statik hesaplamalar yapıldıktan sonra yapılmalıdır.

Polietilen drenaj borusu fiyat listesi
UPVC drenaj borusu

Drenaj boruları, korozyon, donma, toprak basınçları ve çürüme gibi çevresel ve kimyasal koşullarda yeterli mukavemete sahip olmalı ve yüksek bir dayanıklılığa sahip olmalıdır.

PVC drenaj borularında deliklerde tıkanma ve tıkanıklık olasılığı ve deliklerin uzunluğunda ve genişliğinde değişiklik olasılığı polimer borulara göre çok daha azdır. Bu nedenlerden dolayı UPVC drenaj borusu en çok kullanılan drenaj borusudur.

Drenaj borularının boyutları

Known diameter (mm)	Length of the pipe(mm)	Inner diameter (mm)	Outer diameter (mm)
100	170	91.1	100.2
125	110	115.5	125.5
160	70	129.7	144.5
200	40	183.6	203.3

Filtreli PVC drenaj borusu

Filtreli drenaj borusunun farklı projelerde birçok kullanımı vardır. Bu boruların filtresi yapay elyaftan yapılır. Proje yerinin toprağı, filtrede kullanılan elyaf türünü belirlemek için test edilmelidir ve genellikle 300 mikron ile 1000 mikron arasında geçirgenlik açısından incelenir.

Filtreli drenaj borusunun avantajları

Beton borulara göre dayanıklılıkları

Hafiftir ve taşınması kolaydır
Hızlı ve kolay kurulum
Su ve toprağın kimyasal tuzlarına karşı dayanıklıdırlar
Yüksek esneklik
Daha uygun fiyatlıdırlar
Drenaj boruları hakkında önemli noktalar

Bu boruları kullanırken, drenaj sisteminde kullanılan kanalların sabit olduğundan ve çim veya bitki örtüsüyle korunduğundan emin olmak önemlidir. Kirli suyun yağ veya kimyasallarla girmesi nedeniyle yağmurlu koşullarda su doğrudan boşaltılmamalıdır. Bu durumda, suyu bu malzemelerden ayırmak için bir sistem kullanılmalıdır.

Filtreli Oluklu Drenaj Borusu

Yerdeki fazla su, tarım ve spor sektörlerinde üretimin azalması ve toprak erozyonu gibi birçok soruna yol açabilir. Bu nedenle, etkili bir drenaj sistemi herhangi bir yüzey suyu yönetim planının hayati bir bileşenidir.

Rothen Plast’ın drenaj boruları spor çimlerinde, binaların temellerinde, otoyollarda ve çiftlik arazilerinde kullanılır. Rothen Plast bu boruları farklı boyutlarda ve filtreli veya filtresiz olarak üretir.

Filtreli drenaj borularının başlıca uygulamaları şunlardır:
Sızan tuzlu arazilerden suyu uzaklaştırmak ve arazileri ekilebilir tarlalara dönüştürmek
Çiftliklerde yağış ve sulama nedeniyle oluşan fazla suyu uzaklaştırarak toprağın kalitesini korur
Yıkımı önlemek için binalardan fazla suyu uzaklaştırmak

Drenaj boruları iki tip UPVC ve Polietilenden üretilir. Rothen Plast üretim grubu, bu boruların İran’daki en büyük üreticisidir.

Drenaj boruları Alman DIN1187 standardına ve İran ulusal standart numarası INSO7669’a göre üretilir ve tedarik edilir.

Bu şirketin kalite kontrol birimi ve laboratuvarı, ürünlerin ve hammaddelerin üretim sürecini kontrol eder ve inceler.

Filtreli 100 mm oluklu drenaj borusunun teknik bilgileri:

Dış çap: 100 mm

Minimum iç çap: 91 mm

Boru uzunluğu: 100 m

Dış çap toleransı: -/+0,05

Boru etrafındaki her sıradaki oluk sayısı: 6

Bir metre uzunluğundaki delikli sıra sayısı: 64

Bir metre uzunluğundaki toplam delik sayısı: 384

Deliklerin boyutları: 1,3 x 5

Kullanılan filtre türü: PP 450

The excess water on the ground can lead to many problems such as decreased production and the soil erosion in the agricultural and sports sectors. Therefore, an effective drainage system is a vital component of any surface water management plan.

The drainage pipes of Rothen Plast are used in sports turf, Foundations of buildings, highways, and farmlands. Rothen Plast manufactures these pipes in different dimensions and with or without filter.

The main applications of drainage pipes with filter are as follows:

Removing water from leaching saline lands and turning lands into arable farms
It maintains the quality of the soil by removing excess water caused by rainfall and irrigation on farms
Removing excess water from buildings to prevent demolition

The drainage pipes are manufactured in two types of UPVC and Polyethylene. The Rothen Plast production group, is the greatest producer of these pipes in Iran.

Drainage pipes are produced and supplied according to German DIN1187 standard and Iranian national standard number INSO7669.

The quality control unit and laboratory of this company controls and examine the production process of products and the raw materials.

The technical information of 125mm corrugated drainage pipe:

Outer diameter: 125.5mm

Minimum inner diameter: 115mm

Length of the pipe: 100m

Outer diameter tolerance: -/+0.05

Quantity of grooves in each row around the pipe: 6

Quantity of perforated rows in one meter length: 64

The total number of holes in one meter length: 384

Dimensions of the holes: 1.3 x 5

The type of filter used: PP 450

The excess water on the ground can lead to many problems such as decreased production and the soil erosion in the agricultural and sports sectors. Therefore, an effective drainage system is a vital component of any surface water management plan.

The drainage pipes of Rothen Plast are used in sports turf, Foundations of buildings, highways, and farmlands. Rothen Plast manufactures these pipes in different dimensions and with or without filter.

The main applications of drainage pipes with filter are as follows:

Removing water from leaching saline lands and turning lands into arable farms
It maintains the quality of the soil by removing excess water caused by rainfall and irrigation on farms
Removing excess water from buildings to prevent demolition

The drainage pipes are manufactured in two types of UPVC and Polyethylene. The Rothen Plast production group, is the greatest producer of these pipes in Iran.

Drainage pipes are produced and supplied according to German DIN1187 standard and Iranian national standard number INSO7669.

The quality control unit and laboratory of this company controls and examine the production process of products and the raw materials.

The technical information of 160mm corrugated drainage pipe with filter:

Outer diameter: 159.5mm

Minimum inner diameter: 144mm

Length of the pipe: 70m

Outer diameter tolerance: -/+0.05

Quantity of grooves in each row around the pipe: 6

Quantity of perforated rows in one meter length: 84

The total number of holes in one meter length: 504

Dimensions of the holes: 1.3 x 5

The type of filter used: PP 450

The excess water on the ground can lead to many problems such as decreased production and the soil erosion in the agricultural and sports sectors. Therefore, an effective drainage system is a vital component of any surface water management plan.

The drainage pipes of Rothen Plast are used in sports turf, Foundations of buildings, highways, and farmlands. Rothen Plast manufactures these pipes in different dimensions and with or without filter.

The main applications of drainage pipes with filter are as follows:

Removing water from leaching saline lands and turning lands into arable farms
It maintains the quality of the soil by removing excess water caused by rainfall and irrigation on farms
Removing excess water from buildings to prevent demolition

The drainage pipes are manufactured in two types of UPVC and Polyethylene. The Rothen Plast production group, is the greatest producer of these pipes in Iran.

Drainage pipes are produced and supplied according to German DIN1187 standard and Iranian national standard number INSO7669.

The quality control unit and laboratory of this company controls and examine the production process of products and the raw materials.

The technical information of 200mm corrugated drainage pipe with filter:

Outer diameter: 199.5mm

Minimum inner diameter: 182mm

Length of the pipe: 40m

Outer diameter tolerance: -/+0.05

Quantity of grooves in each row around the pipe: 6

Quantity of perforated rows in one meter length: 60

The total number of holes in one meter length: 360

Dimensions of the holes: 1.3 x 8

The type of filter used: PP 450

Corrugated Drainage Pipe

The excess water on the ground can lead to many problems such as decreased production and the soil erosion in the agricultural and sports sectors. Therefore, an effective drainage system is a vital component of any surface water management plan.

The drainage pipes of Rothen Plast are used in sports turf, Foundations of buildings, highways, and farmlands. Rothen Plast manufactures these pipes in different dimensions and with or without filter.

The drainage pipes are manufactured in two types of UPVC and Polyethylene. The Rothen Plast production group, is the greatest producer of these pipes in Iran.

Drainage pipes are produced and supplied according to German DIN1187 standard and Iranian national standard number INSO7669.

The quality control unit and laboratory of this company controls and examine the production process of products and the raw materials.

The technical information of 100mm corrugated drainage pipe:

Outer diameter: 100mm

Minimum inner diameter: 91mm

Length of the pipe: 100m

Outer diameter tolerance: -/+0.05

Quantity of grooves in each row around the pipe: 6

Quantity of perforated rows in one meter length: 64

The total number of holes in one meter length: 384

Dimensions of the holes: 1.3 x 5

The excess water on the ground can lead to many problems such as decreased production and the soil erosion in the agricultural and sports sectors. Therefore, an effective drainage system is a vital component of any surface water management plan.

The drainage pipes of Rothen Plast are used in sports turf, Foundations of buildings, highways, and farmlands. Rothen Plast manufactures these pipes in different dimensions and with or without filter.

The drainage pipes are manufactured in two types of UPVC and Polyethylene. The Rothen Plast production group, is the greatest producer of these pipes in Iran.

Drainage pipes are produced and supplied according to German DIN1187 standard and Iranian national standard number INSO7669.

The quality control unit and laboratory of this company controls and examine the production process of products and the raw materials.

The technical information of 125mm corrugated drainage pipe:

Outer diameter: 125.5mm

Minimum inner diameter: 115mm

Length of the pipe: 100m

Outer diameter tolerance: -/+0.05

Quantity of grooves in each row around the pipe: 6

Quantity of perforated rows in one meter length: 85

The total number of holes in one meter length: 510

Dimensions of the holes: 1.3 x 5

The excess water on the ground can lead to many problems such as decreased production and the soil erosion in the agricultural and sports sectors. Therefore, an effective drainage system is a vital component of any surface water management plan.

The drainage pipes of Rothen Plast are used in sports turf, Foundations of buildings, highways, and farmlands. Rothen Plast manufactures these pipes in different dimensions and with or without filter.

The drainage pipes are manufactured in two types of UPVC and Polyethylene. The Rothen Plast production group, is the greatest producer of these pipes in Iran.

Drainage pipes are produced and supplied according to German DIN1187 standard and Iranian national standard number INSO7669.

The quality control unit and laboratory of this company controls and examine the production process of products and the raw materials.

The technical information of 160mm corrugated drainage pipe:

Outer diameter: 159.5mm

Minimum inner diameter: 144mm

Length of the pipe: 70m

Outer diameter tolerance: -/+0.05

Quantity of grooves in each row around the pipe: 6

Quantity of perforated rows in one meter length: 84

The total number of holes in one meter length: 504

Dimensions of the holes: 1.3 x 5

The excess water on the ground can lead to many problems such as decreased production and the soil erosion in the agricultural and sports sectors. Therefore, an effective drainage system is a vital component of any surface water management plan.

The drainage pipes of Rothen Plast are used in sports turf, Foundations of buildings, highways, and farmlands. Rothen Plast manufactures these pipes in different dimensions and with or without filter.

The drainage pipes are manufactured in two types of UPVC and Polyethylene. The Rothen Plast production group, is the greatest producer of these pipes in Iran.

Drainage pipes are produced and supplied according to German DIN1187 standard and Iranian national standard number INSO7669.

The quality control unit and laboratory of this company controls and examine the production process of products and the raw materials.

The technical information of 200mm corrugated drainage pipe:

Outer diameter: 199.5mm

Minimum inner diameter: 182mm

Length of the pipe: 40m

Outer diameter tolerance: -/+0.05

Quantity of grooves in each row around the pipe: 6

Quantity of perforated rows in one meter length: 60

The total number of holes in one meter length: 360

Dimensions of the holes: 1.3 x 8

The excess water on the ground can lead to many problems such as decreased production and the soil erosion in the agricultural and sports sectors. Therefore, an effective drainage system is a vital component of any surface water management plan.

The drainage pipes of Rothen Plast are used in sports turf, Foundations of buildings, highways, and farmlands. Rothen Plast manufactures these pipes in different dimensions and with or without filter.

The drainage pipes are manufactured in two types of UPVC and Polyethylene. The Rothen Plast production group, is the greatest producer of these pipes in Iran.

Drainage pipes are produced and supplied according to German DIN1187 standard and Iranian national standard number INSO7669.

The quality control unit and laboratory of this company controls and examine the production process of products and the raw materials.

The excess water on the ground can lead to many problems such as decreased production and the soil erosion in the agricultural and sports sectors. Therefore, an effective drainage system is a vital component of any surface water management plan.

The drainage pipes of Rothen Plast are used in sports turf, Foundations of buildings, highways, and farmlands. Rothen Plast manufactures these pipes in different dimensions and with or without filter.

The drainage pipes are manufactured in two types of UPVC and Polyethylene. The Rothen Plast production group, is the greatest producer of these pipes in Iran.

Drainage pipes are produced and supplied according to German DIN1187 standard and Iranian national standard number INSO7669.

The quality control unit and laboratory of this company controls and examine the production process of products and the raw materials.

The excess water on the ground can lead to many problems such as decreased production and the soil erosion in the agricultural and sports sectors. Therefore, an effective drainage system is a vital component of any surface water management plan.

The drainage pipes of Rothen Plast are used in sports turf, Foundations of buildings, highways, and farmlands. Rothen Plast manufactures these pipes in different dimensions and with or without filter.

The drainage pipes are manufactured in two types of UPVC and Polyethylene. The Rothen Plast production group, is the greatest producer of these pipes in Iran.

Drainage pipes are produced and supplied according to German DIN1187 standard and Iranian national standard number INSO7669.

The quality control unit and laboratory of this company controls and examine the production process of products and the raw materials.

The excess water on the ground can lead to many problems such as decreased production and the soil erosion in the agricultural and sports sectors. Therefore, an effective drainage system is a vital component of any surface water management plan.

The drainage pipes of Rothen Plast are used in sports turf, Foundations of buildings, highways, and farmlands. Rothen Plast manufactures these pipes in different dimensions and with or without filter.

The drainage pipes are manufactured in two types of UPVC and Polyethylene. The Rothen Plast production group, is the greatest producer of these pipes in Iran.

Drainage pipes are produced and supplied according to German DIN1187 standard and Iranian national standard number INSO7669.

The quality control unit and laboratory of this company controls and examine the production process of products and the raw materials.

We Are Not The First But The Best

contact us

Ana su boru hattı

Filtreli Oluklu Drenaj Borusu

The main applications of drainage pipes with filter are as follows:

The technical information of 125mm corrugated drainage pipe:

The technical information of 160mm corrugated drainage pipe with filter:

The main applications of drainage pipes with filter are as follows:

The technical information of 200mm corrugated drainage pipe with filter:

Corrugated Drainage Pipe

The technical information of 100mm corrugated drainage pipe:

The technical information of 125mm corrugated drainage pipe:

The technical information of 160mm corrugated drainage pipe:

The technical information of 200mm corrugated drainage pipe:

We Are Not The First But The Best

Rothenplast

Bir Şey Ara

Fotoğraf Galerisi

11/7 packard Avenue Castle Hill, NSW, 2154, Sidney Avustralya

1ed bina Madar SQ Madar Mehrvila Karaj İran